PART |
Description |
Maker |
MM1075 |
System Reset (with built-in watchdog timer) From old datasheet system
|
Mitsumi
|
MM1142 |
System Reset (with built-in watchdog timer) From old datasheet system
|
MITSUMI ELECTRIC
|
MM1136 |
IC for System Reset (with built-in watchdog timer) Monolithic IC
|
MITSUMI[Mitsumi Electronics, Corp.]
|
MM1075 MM1075XD MM1075XF |
System Reset (with built-in watchdog timer) Monolithic IC
|
MITSUMI ELECTRIC CO LTD MITSUMI[MITSUMI ELECTRIC] Mitsumi Electronics, Corp.
|
UN8231A UN8231 UNR8231A UNR8231 0706 UNR8231/UNR82 |
UNR8231/UNR8231A (UN8231/UN8231A) - NPN Transistor with built-in Resistor From old datasheet system Transistors with built-in Resistor
|
Matsshita / Panasonic
|
CAT825MSDI-GT3 CAT824MSDI-GT3 CAT823 CAT823LSDI-GT |
System Supervisory Voltage Reset with Watchdog and Manual Reset
|
ON Semiconductor
|
PQ05RR12 PQ05RR13 |
1A Output Low Power-Loss Voltage Regulators(Built-in Reset Signal Generating Function) 1A Output, Low Power-Loss Voltage Regulators(Built-in Reset Signal Generating Function)
|
Sharp Corporation SHARP[Sharp Electrionic Components]
|
DTA113 DTA113ZE DTA113ZKA DTA113ZSA DTA113ZUA A580 |
Digital transistors (built-in resistors) From old datasheet system TVS 1500W 7.5V UNIDIRECT SMC Digital transistor (built in resistor)
|
ROHM[Rohm] Rohm CO.,LTD.
|
MN101E03G |
Microcontroller, 128K ROM, 4K RAM From old datasheet system Remote control input discriminant circuit built-in, build-in NTSC video signal processing circuit, built-in 3-line comb filter 8-BIT, MROM, MICROCONTROLLER, PQFP84
|
PANASONIC[Panasonic Semiconductor] Panasonic Corporation Panasonic, Corp.
|
MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d CPU / System Supervisors Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology] Microchip Technology Inc. Microchip Technology, Inc.
|
MAX6713Z MAX6713T MAX6713S MAX6713R MAX6713M MAX67 |
Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-low push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low open-drain reset. Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-high push-pull reset. Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset. 4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4 8-Bit Shift Register 16-SOIC -40 to 125 4引脚、SC70微处理器复位电路,带有手动复位输 8-Bit Shift Register 16-PDIP -40 to 125 4引脚、SC70微处理器复位电路,带有手动复位输
|
Maxim Integrated Produc... MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products] Maixm Maxim Integrated Products, Inc.
|